Application of CFD in Studying and Modification of Gas Burners of Catalytic Reforming Unit of Abadan Refinery in Iran
|
10.5120/8787-2760 |
Saeed Talebzadeh, Bahram Hashemi Shahraki and Ahmad Shariati. Article: Application of CFD in Studying and Modification of Gas Burners of Catalytic Reforming Unit of Abadan Refinery in Iran. International Journal of Computer Applications 55(9):46-51, October 2012. Full text available. BibTeX
@article{key:article,
author = {Saeed Talebzadeh and Bahram Hashemi Shahraki and Ahmad Shariati},
title = {Article: Application of CFD in Studying and Modification of Gas Burners of Catalytic Reforming Unit of Abadan Refinery in Iran},
journal = {International Journal of Computer Applications},
year = {2012},
volume = {55},
number = {9},
pages = {46-51},
month = {October},
note = {Full text available}
}
Abstract
This article is a report of the attempts which were made to model an industrial premix gas burner which was operating in one of the furnaces of the Catalytic Reforming Unit (CRU) of Abadan refinery. The main objective of the modeling was to investigate on the effect of the structural geometry of the burner on its mode of operation, i. e. complete combustion of the gas, maximum generation of heat and production of a proper flame configuration. For this goal, fundamental equations of the conservation of mass, momentum and energy for fuel-air mixture flowing in the burner were written and solved by using the Computational Fluid Dynamic (CFD) techniques and the results were analyzed. The main conclusion of the research was that various effects of the changes in the burner come to appear and an appropriate correction on the burner was recommended to the industry.
References
- Charles E. Baukal, JR. , PH. D. ,P. E. , John Zink Company, LLC, Tulsa, Oklahama (2001), The John Zink Combustion Handbook, Boca Raton London New York Washington, D. C. , CRC Press.
- A. Garg, Better burner specifications, Hydrocarbon Processing, 68(8), 71-72, 1989.
- API Publication 535: Burner for Fired Heaters in General Refinery Services, 1st edition, American Petroleum Institute, Washington, D. C. , July 1995.
- S. R. Turns, An Introduction to Combustion, McGraw-Hill, New York, 1996.
- Wei dong, KTH Royal Institute of Technology, Design of Advanced Industrial Furnaces Using Numerical Modeling Method, Stockholm, March 2000.
- FLUENT v. 6 Help, Fluent Inc. 2001-11-29.
- G. K. Batchelor. An Introduction to Fluid Dynamics. Cambridge Univ. Press, Cambridge, England, 1967.
- G. K. Batchelor. An Introduction to Fluid Dynamics. Cambridge Univ. Press, Cambridge, England, 1967.
- F. Kreith, Ed. , The CRC Handbook of Mechanical Engineering, CRC Press, Boca Raton, FL, 1998.
- B. E. Launder and D. B. Spalding. Lectures in Mathematical Models of Turbulence. Academic Press, London, England, 1972.
- W. C. Reynolds. Fundamentals of turbulence for turbulence modeling and simulation, Lecture Notes for Von Karman Institute Agard Report No. 755, 1987.