CFP last date
20 December 2024
Reseach Article

Non Destructive Analysis of Three Phase Induction Machine Fault Diagnosis

Published on December 2013 by Ramesh V, Deepa K, Vanaja Ranjan P
International Conference on Innovations In Intelligent Instrumentation, Optimization and Electrical Sciences
Foundation of Computer Science USA
ICIIIOES - Number 5
December 2013
Authors: Ramesh V, Deepa K, Vanaja Ranjan P
a962a380-9d44-46ec-8d74-8857189648b8

Ramesh V, Deepa K, Vanaja Ranjan P . Non Destructive Analysis of Three Phase Induction Machine Fault Diagnosis. International Conference on Innovations In Intelligent Instrumentation, Optimization and Electrical Sciences. ICIIIOES, 5 (December 2013), 15-22.

@article{
author = { Ramesh V, Deepa K, Vanaja Ranjan P },
title = { Non Destructive Analysis of Three Phase Induction Machine Fault Diagnosis },
journal = { International Conference on Innovations In Intelligent Instrumentation, Optimization and Electrical Sciences },
issue_date = { December 2013 },
volume = { ICIIIOES },
number = { 5 },
month = { December },
year = { 2013 },
issn = 0975-8887,
pages = { 15-22 },
numpages = 8,
url = { /proceedings/iciiioes/number5/14312-1502/ },
publisher = {Foundation of Computer Science (FCS), NY, USA},
address = {New York, USA}
}
%0 Proceeding Article
%1 International Conference on Innovations In Intelligent Instrumentation, Optimization and Electrical Sciences
%A Ramesh V
%A Deepa K
%A Vanaja Ranjan P
%T Non Destructive Analysis of Three Phase Induction Machine Fault Diagnosis
%J International Conference on Innovations In Intelligent Instrumentation, Optimization and Electrical Sciences
%@ 0975-8887
%V ICIIIOES
%N 5
%P 15-22
%D 2013
%I International Journal of Computer Applications
Abstract

A Non Destructive Analysis (NDA) of Three Phase Induction Machine fault Diagnosis has been discussed in this paper. The Induction Machine Prototype was designed using Finite Element Analysis (FEM) based CAD software. Stator Inter turn Fault is designed by short circuiting the turns with current limiting resistor. The Motor current Signature Analysis (MCSA) has been done using LabVIEW based FFT with current data which is generated by 'FEM' based Induction Machine prototype. The Flux Signature Analysis also has been done and compared with MCSA. Both the Analysis are done for Different load conditions with different fault severity. The fault frequency Magnitude at various fault conditions are calculated and tabulated. This cost less NDA methodology will be the best for Machine fault Diagnosis. This paper uses a CAD package called "Infolytica Magnet 6. 11. 2" for the Static 2D and Transient 2D analysis.

References
  1. Ahcène Bouzida, Omar Touhami, Rachid Ibtiouen, Adel Belouchrani, Maurice Fadel, and A. Rezzoug "Fault Diagnosis in Industrial Induction Machines Through Discrete Wavelet Transform". IEEE Transactions on Industrial Electronics, vol. 58, no. 9, September 2011.
  2. Amine Yazidi, Member, IEEE, Humberto Henao. "A Web-Based Remote Laboratory for Monitoring and Diagnosis of AC Electrical Machines" IEEE transactions on industrial electronics, vol. 58, no. 10, October 2011.
  3. Collamatit L, Filippettit,G; Fanceschini S', Piran, C Tassod "Induction Machine Stator Fault alp-Line Diagnosis based on LabVIE'W Enviroment". 0-7803-31-09-5/96/$5. 00 1996 IEEE.
  4. Cusido, J. Tech. Univ. of Catalonia, Barcelona Romeral, L. ; Ortega, 3. 5 "Fault Detection in Induction Machines Using Power Spectral Density in Wavelet Decomposition".
  5. Haoxiang Lang, Ying Wang, and Clarence W. de Silva Industrial Automation Laboratory Department of Mechanical Engineering. "An Automated Industrial Fish Cutting Machine: Control, Fault Diagnosis and Remote Monitoring" The University of British Columbia Vancouver, BC, Canada {hxlang; ywang; desilva}@mech. ubc. ca. Proceedings of the IEEEInternational Conference on Automation and Logistics Qingdao, China September 2008.
  6. Jordi Cusidó, Student Member, IEEE, Luis Romeral, Member, IEEE, Juan A. Ortega, Member, IEEE, Javier A. Rosero, and Antonio García Espinosa, Member, IEEE "Fault Detection in Induction Machines Using Power Spectral Density in Wavelet Decomposition". IEEE Transactions on Industrial Electronics, Vol. 55, NO. 2, February 2008.
  7. Joya Kappatou, Athanasios N. Safacas University of Patras, Department of Electrical and Computer Engineering Electromechanical Energy Conversion Laboratory. Tiltled "Finite Element Inductance Calculations in 3-phase Squirrel-Cage Induction Machines with Broken Rotor Bars" 1-4244-0194-1/06/2006 IEEE.
  8. Luis Alberto Pereira I, Daniel da Silva Gazzana2. "Rotor Broken Bar Detection and Diagnosis in Induction Motors Using Stator Current Signature Analysis and Fuzzy Logic". The 30th Annual Conference of the IEEE Industrial Electronics Society, November 2 - 6, 2004, Busan, Korea.
  9. Stephen Nawrocki, Lei Hao, Xidong Tang General Motor R&D Center, Warren MI. "Modeling & Analysis of Weld Short Faults of Bar-Wound Propulsion IPM Machine Part II: Phase-to-Phase Short" 978-1-61284-247-9/11/2011 IEEE.
  10. Sudar vizhi. A, Nagaraj S, Dr. RamaReddy. S Department of Electrical and Electronics Engineering, Jerusalem College of Engineering, Chennai, India. "Detection And Analysis of Broken Bar in Three Phase Squirrel Cage Induction Motor using FEM". 2012 International Conference on Computing, Electronics and Electrical Technologies [ICCEET].
  11. Vaseghi B, N. Takorabet, F. Meibody-Tabar "Modeling of 1M with Stator Winding Inter-turn Fault Validated by FEM". Proceedings of the 2008 International Conference on Electrical Machines.
  12. K. Vinoth Kumar, S. Suresh KumarI. J. "LabVIEW based Condition Monitoring of Induction Machines" Intelligent Systems and Applications, 2012, 3, 56-62. DOI:10. 5815/ijisa. 2012. 03. 08.
Index Terms

Computer Science
Information Sciences

Keywords

3? Induction Motor Finite Element Analysis Motor Current Signature Analysis Flux Signature Analysis Fast Fourier Transform.