CFP last date
20 May 2024
Reseach Article

Analysis, Design and Fabrication of Microwave Passive Couplers

Published on December 2015 by Shivakumar Swamy D.s, Shailaja Y.
National Conference on Power Systems and Industrial Automation
Foundation of Computer Science USA
NCPSIA2015 - Number 4
December 2015
Authors: Shivakumar Swamy D.s, Shailaja Y.
6bd62cfb-11e1-40c3-9b36-91ba624081f3

Shivakumar Swamy D.s, Shailaja Y. . Analysis, Design and Fabrication of Microwave Passive Couplers. National Conference on Power Systems and Industrial Automation. NCPSIA2015, 4 (December 2015), 14-17.

@article{
author = { Shivakumar Swamy D.s, Shailaja Y. },
title = { Analysis, Design and Fabrication of Microwave Passive Couplers },
journal = { National Conference on Power Systems and Industrial Automation },
issue_date = { December 2015 },
volume = { NCPSIA2015 },
number = { 4 },
month = { December },
year = { 2015 },
issn = 0975-8887,
pages = { 14-17 },
numpages = 4,
url = { /proceedings/ncpsia2015/number4/23349-7278/ },
publisher = {Foundation of Computer Science (FCS), NY, USA},
address = {New York, USA}
}
%0 Proceeding Article
%1 National Conference on Power Systems and Industrial Automation
%A Shivakumar Swamy D.s
%A Shailaja Y.
%T Analysis, Design and Fabrication of Microwave Passive Couplers
%J National Conference on Power Systems and Industrial Automation
%@ 0975-8887
%V NCPSIA2015
%N 4
%P 14-17
%D 2015
%I International Journal of Computer Applications
Abstract

This paper presents the complete analysis, design of microwave Parallel coupler using synthesis approach and Branch Line Coupler which has been fabricated using FR-4 PCB substrate material and tested in the lab environment successfully. The design of all above components is done using the IE3D simulation tool and tested its S-Parameter results with Vector Network Simulator (VNA). The design parameters with respect to the IE3D structures of the physical dimensions are optimized successfully using Matlab.

References
  1. The complete design of microstrip directional couplers using the synthesis method by Abdulla Eroglu. [ieee transaction on instrumentation and measurements propagation letters, vol. 13, 2014). Microwave Engineering by David M. Pozar.
  2. Realization Of Miniaturized Quadrature Hy-Brid Coupler With Reduced Length Branch Arms Using Recursively Loaded Stubs by Rowdra Ghatak, and Biswajit Sarkar, Progress in Electromagnetics Research Letters, Vol. 43, 45 (54,2013).
  3. Gupta, K. C. Microstrip lines and slotlines / K. C. Gupta, Ramesh Garg, I. J. Bahl. Artech House Dedham, Mass. 1979.
  4. Miniaturization Of Branch-Line Couplers Using Open Stubs And Stepped Impedance Unit Cells with Meandering Transmission Lines, Circuits and Systems: An International Journal (CSIJ), Vol. 1, No. 3, July-2014.
  5. Kraus J. D. Antennas, 2d Ed. McGraw Hill: Boston, Ma, 1988.
  6. Balanis C. A. Antenna Theory: Analysis and design, 2d Ed, Wiley: New York, NY, 1997.
  7. K. Chang, Microwave ring circuits and Antennas, John Wiley & Sons, 1996.
  8. S. Kumar, C. Tannous, T. Danshin,"A Multisection Broadband Impedance Transforming Branch-line Hybrid", IEEE Trans. Microwave Theory and Techniques, Vol. 43, No. 11, 1995.
  9. Fooks, E. H. Microwave engineering using microstrip circuits, Prentice Hall New York 1990.
  10. Design of Directional Coupler Using Synthesis Method on Defected Ground Structure by Rohit Samadhiya, Neeraj Sharma, Abhishek Tripathi, Sriram Gupta, Praveen Sharma, International Journal of Information and Computation Technology (IJICT) ISSN 0974-2239 Volume 3, Number 10 (2013).
Index Terms

Computer Science
Information Sciences

Keywords

Branch Line Coupler (blc) Fr-4 Substrate Ie3d Tool Parallel Coupler Vector Network Simulator (vna)